https://www.posetteforever.com/viewtopic.php?f=21&t=3953
-----------------------------------
ahjah
Monday, 22 January 2018, 02:37 PM

NEA III is out
-----------------------------------
:hi: Hello friends and all Posette fans out there :friends:

Just on my daily patrol I found Pitklad released a new NEA over at RR.
NEA III Aeonia :heartbeat:  is her name. For Poser 6+.
Didn't test her yet, but as I know our PitKlad, she should be something very special.
Tons of morphs, ERC, geometry switch for map swapping :uuh:  P4<>V1/2 etc.

[url=https://www.renderosity.com/mod/freestuff/nea-3-aeonia/78552&ca]NEA III

P.S.: I normally don't do that, linking to RR ;) , should be an exception...


-----------------------------------
Chromium
Monday, 22 January 2018, 05:55 PM

Re: NEA III Is Out
-----------------------------------
Thanks Ahjah.

Hope I remember my logon....


-----------------------------------
Nik
Tuesday, 23 January 2018, 03:26 AM

Re: NEA III Is Out
-----------------------------------
Copy of my comment at R**Y:

Hi ! After several attempts to decode the OBJ.RTE, I tackled the OBZ.RTE, which worked first time.

FWIW, the Original P4's NudeWoman.OBJ aka 'Posette', the OBJ from unzipped P7's P4NudeWoman.OBZ and the OBJ from unzipped P11Pro's P4NudeWoman.OBZ all have the same CRC-32: 44 EA 89 EF.

Could any-one using RTE or PCF PLEASE state the CRC-32 of their key-file ? Thank you.


-----------------------------------
ahjah
Tuesday, 23 January 2018, 05:13 AM

Re: NEA III is out
-----------------------------------
Hi Nik

A quick look at the file I use for decoding shows the same CRC . The file is from 2005 
Didn't try it on NEA III yet thou...


-----------------------------------
PitKlad
Friday, 26 January 2018, 12:59 PM

Re: NEA III Is Out
-----------------------------------
Hello everyone! Thanks for your interest for Nea 3  :hug2: 
I don't remember the rules for uploading files here
the zip is at 27.4 MB
For anyone that can not log in RR I may upload it here also

@Nik I don't know what CRC means so I am afraid I can't answer your question. 
Some reported having problem with the OBZ while others with the OBJ however for everyone one of the two methods worked.

I used the RTE version 1 provided from the links on the readme file. All files are RTE encoded, PCF encoding uses another encoder, OBJ mover, that due to limitations wasn't used on Nea 3.

I had to encode a whole directory as a zip (the folder that contains all the alternative geometry files) and only RTE can do that. For PCF you have to encode obj files one by one.

If you still have problems installing Nea 3 I can make a PCF file just for the main obj but than alternative geometry won't wokr  :)


-----------------------------------
Nik
Friday, 26 January 2018, 02:09 PM

Re: NEA III Is Out
-----------------------------------
" Cyclic Redundancy Check ". Like the parity bit on RS-232 / Serial packets etc, but 'all grown up'...

On some OS versions, you can right-click file in directory. Among the options may be 'CRC / SHA' with a sub-menu of variants...


-----------------------------------
ahjah
Friday, 26 January 2018, 07:21 PM

Re: NEA III is out
-----------------------------------
Hi PitKlad :friends:

Our file size limit for upload is 30 MB, so 27.4 MB is inside this specs.
We'd be proud and honored to host your marvelous work :thumb:
If you experience problems uploading don't be shy and contact me, here or via PM :D


-----------------------------------
PitKlad
Friday, 26 January 2018, 09:15 PM

Re: NEA III Is Out
-----------------------------------
I just uploaded the file
however when i test the download I get:

The selected File no longer exists

404 File Not Found: The File Nea3byPitKlad_3.zip does not exist.


-----------------------------------
ahjah
Saturday, 27 January 2018, 12:56 AM

Re: NEA III is out
-----------------------------------
Hi PitKlad

I just checked, and the file is there, but renamed to 568b3c056572dd5048b4dc8ffdde40ff.zip for some reason.
I'll try to fix it, but I'm not quite sure how...


-----------------------------------
ahjah
Saturday, 27 January 2018, 02:00 AM

Re: NEA III is out
-----------------------------------
I've tried re-uploading it, but with the same result :roll: I contacted Tormie. I hope he can solve it.


-----------------------------------
Tormie
Saturday, 27 January 2018, 07:52 AM

Re: NEA III is out
-----------------------------------
I'm here. I solve problems.


-----------------------------------
Tormie
Saturday, 27 January 2018, 09:12 AM

Re: NEA III is out
-----------------------------------
(temporarily) fixed :uuh:


-----------------------------------
Tormie
Saturday, 27 January 2018, 09:12 AM

Re: NEA III is out
-----------------------------------
Thank you PitlKlad :friends:  :hug2:


-----------------------------------
PitKlad
Saturday, 27 January 2018, 10:18 AM

Re: NEA III Is Out
-----------------------------------
And I  thank you for hosting Nea! Also for all the love and interest this forum has given to this project!  :heartbeat:  :hug2:


-----------------------------------
ahjah
Saturday, 27 January 2018, 04:44 PM

Re: NEA III is out
-----------------------------------
:thumb: Good to hear it's fixed now. Thanks Davide :hug2:


-----------------------------------
ahjah
Saturday, 27 January 2018, 05:39 PM

Re: NEA III is out
-----------------------------------
... about the decoding thingie...

I have two P4NudeWoman.OBZ on my drive. One with CRC-32 0908B326 that does work, and the other with CRC-32 EAAF2602 does not. No idea from witch installation they are, could be 6 to 8. The resulting P4NudeWoman.obj of both files have CRC-32 44EA89EF and both work for decoding. So working with the unpacked .obj (I use free, open source 7zip) on Nea_3_ZIP_OBJ.rte should be safe, no matter what version of Poser you are on. I hope this information helps.


-----------------------------------
Nik
Saturday, 27 January 2018, 06:57 PM

Re: NEA III Is Out
-----------------------------------
Thank you.


-----------------------------------
Geronisi
Sunday, 28 January 2018, 09:43 AM

Re: NEA III Is Out
-----------------------------------
Great news, Ahjah. I'm going to give it a shot. I realize there are no new revolutionary features, but I'm still excited about this. Or am I missing some major new features?


-----------------------------------
ahjah
Sunday, 28 January 2018, 04:46 PM

Re: NEA III Is Out
-----------------------------------
Hi and welcome Geronisi :hi: 

[quote user="Geronisi" post="45118"]Great news, Ahjah. I'm going to give it a shot. I realize there are no new revolutionary features, but I'm still excited about this. Or am I missing some major new features?[/quote]

I don't know you yet, so I don't know what you would consider "revolutionary".
I'd suggest to try yourself. If there are any issues, just ask...


-----------------------------------
PitKlad
Tuesday, 30 January 2018, 08:55 PM

Re: NEA III Is Out
-----------------------------------
A full set of joint controlled morphs to improve breaking of the mesh on extreme poses is the biggest new thing in this, final, release.
Other new things? Alternative geometries, Posette skin option with a dial, new face, body and new morphs head to toes.
 :D


-----------------------------------
ahjah
Tuesday, 30 January 2018, 10:22 PM

Re: NEA III is out
-----------------------------------
:friends: Hi PitKlad

Don't feed the bot :binky2:  (I think Geronisi is. I've read this kind of standard phrases several times before ;) )


-----------------------------------
PitKlad
Tuesday, 30 January 2018, 11:21 PM

Re: NEA III Is Out
-----------------------------------
:redface: lol oh! I could never tell!  :D


-----------------------------------
Chromium
Monday, 12 February 2018, 06:06 PM

Re: NEA III Is Out
-----------------------------------
Thanks for sharing PitKlad!


-----------------------------------
PitKlad
Tuesday, 13 February 2018, 08:40 AM

Re: NEA III Is Out
-----------------------------------
[quote user="Chromium" post="45144"]Thanks for sharing PitKlad![/quote]

I hope you like her! Thanks for the support!  :friends:


