https://www.posetteforever.com/viewtopic.php?f=21&t=3138&p=38820#p38820
-----------------------------------
Nik
Saturday, 08 March 2008, 02:39 PM

Slow Going.....
-----------------------------------
EI's C-D program and licences all 'phone home' at registration, so I had to install them and Poser-4 on this light-weight Browser-PC...

Put it this way-- Poser did not need the 'Large Memory' patch !!

Also, this Browser-PC is  v-e-r-y _  s-l-o-w  compared to the other's 3 GHz and interleaved RAM, and I can only work on one screen instead of the CAD-PC's two...

And, yes, Poser keeps trying to phone out, sending my paranoid fire-wall into hysterics...

Anyway, grumbles aside, I've unpacked and installed a couple of garments, begun experimenting...

First issue is that you *MUST* know which figure the original garment was meant to clad. 
Okay, this is often obvious from the thumbnail, but a lot of old freebies just say 'Vicky' or 'V' without a #1, 2, 3 etc. Also, unsupported 'variants' such as 'Sassy' or 'Latexa' may cause problems as morphs do not transfer. Fortunately, the date is a fair clue, and doing quick conversions on low-quality setting should soon show which gets closest...

D'uh, why does no-one put REMs in their CR2 ?? 

I have not yet tried 'fixing' old P4F freebies directly or by conversion to eg P4M then back again as they are all on the other PC...

Second, poke-though corrections: I'm still learning. 
I began with a modest A3 uniform --Not the Klingon Kit !!-- and coaxed it to fit Posette. I've beaten all the gaps except for two rib edges in lower back, will try the morphs next.
---

FIL is making good progress, is being chivvied by eager 'Physio-Terrorists', has sat out and is eating well. Only snag is they must  taper his pain relief, so he will no longer be amused by hallucinations of a small black cat nimbly leaping from bin-lid to bed-frame to window-sill and back as he's falling asleep...


